Epson L120 LED Indicators Flashing Simultaneously on TECH Journal EP#1 - Barkingmode.

Good Day Guys! Today I am going to share with you my journey as a Computer Tech. I added this on barkingmode TECH Journal. Trouble is not that hard but it is best to share it, so others can make their work faster and easier. 

#BarkingmodeTechJournal
#BarkingmodeTechJourney
#EpsonL120Trouble



Trouble/Problem Description.
On this trouble lights are blinking on both Power LED and Error/Resume LED. Printer head is stuck in the middle and not moving when you turn the printer on. Sometimes it moves but stops in few seconds. 

Do's to Identify & Locate the Trouble/Problem.  
1. Check if the head is moving properly.
2. Open the front cover, take a look on the roller and other parts.
3. Check for broken parts.

I saw this when I opened the front cover. See image below.



Action Taken.
1. Remove the Ink Tank cover first see illustration below.


2. Remove the screws to unlocked the top cover.


After removing the screws and top cover. The printer will look like this, see image below.


You can now return the loose or misaligned roller back to its original place. Printer will still work even if the roller is missing but better to return or replace this roller so that paper in the future will not stuck. These rollers are important to prevent damage to the paper.

3. Return the top cover and screws.


4. Return the Ink Tank cover.
5. Testing the printer if the trouble is already fix. See below.


6. Print an image for customer proof. I always make a proof that I already printed something.


7. Wipe or clean the printer for additional handsome points. Cheers!


Hope this post will help you on your journey as a Tech. Thank you for reading this post.

Last Modified: Jan. 8, 2020.

Comments

Post a Comment

Popular posts from this blog

Most Common Problems on Automatic Voltage Regulator

Image
Hi there, today my post is about automatic voltage regulator. What goes into your mind when you hear the term automatic voltage regulator? Yes, its automatically regulate voltage, right? So how this automatic voltage regulator affects our computer? Actually this device does not affect computers directly. This device does not speed up our computer but it protects our computer parts from easily burned during voltage fluctuation. Also it provides step down power for devices from Japan or the US. If we live in Asia and plug this devices, this action could be a disaster to this devices. In Japan and US voltages are in 110volts to 120volts only while in Asia most devices runs in 220volts. So, this AVR is not only for voltage fluctuation but also as step down power. So, what are the most common problems of automatic voltage regulator? I have here the list of problems that we might encounter if we have a defective automatic voltage regulator. 1. Defective Plug Defective plu
Read more

How To Repair USB Or PS2 Mouse

Image
If we encountered defect on our old mouse we normally buy new mouse. Like when mouse often stuck, we always get angry and usually replace it with new one. What if you don't want to buy and still want to use your old mouse. Below are the steps to fix your defective mouse. But before we continue, please read the site policy . If you have already read this policy, continue reading this post. You need the following. 1. Soldering iron 2. Scissors 3. Masking tape 4. Soldering Lead 5. Small screwdriver (Phillips) This procedure is only applies to stuck mouse or infrared sensor often turns off for both PS2 and USB Mouse. Step 1. Remove the mouse from your computer, remove the screws from the mouse. Step 2. Cut the wire that connects to the mouse side about 1/2" or 3/4" inch. Same size inside or about 1" inch. Step 3. Solder the wire to connect both end. To connect the wire if the color is red it should be connected to red end also, you should fo
Read more

Typical Computer Headset Wiring Diagram - Barkingmode.

Image
Hello guys, I have today a wiring diagram which I traced the wiring from a cheap headset. Drawn and transferred to a computer to create a .jpeg file. I also, color it so that it will be easier for everyone to analyse the connection. This will help us remember the connection easily if we break the wire unintentionally. Having a wiring diagram connection of plug and wiring will be easier for us. See the headset wiring diagram below. The speakers on the drawing is a symbol and not the real thing as a drawing. Volume and microphone is a real image as a drawing. Only the Left and Right speakers are the symbol on this wiring diagram. You can also identify the location of the left and right speakers in the speaker plug. The mic input in the plug also shows its pin configuration and wiring of the microphone. This will help us locate easily the pin of the speaker in the plug or the mic-in in the mic plug. Last modified: Aug. 31, 2019.
Read more